Network File System Version 4 C. Lever Internet-Draft Oracle Intended status: Standards Track 13 May 2022 Expires: 14 November 2022 Network File System (NFS) Upper-Layer Binding To RPC-Over-RDMA Version 2 draft-ietf-nfsv4-nfs-ulb-v2-07 Abstract This document specifies Upper-Layer Bindings of Network File System (NFS) protocol versions to RPC-over-RDMA version 2. Note Discussion of this draft takes place on the NFSv4 working group mailing list (nfsv4@ietf.org), archived at https://mailarchive.ietf.org/arch/browse/nfsv4/. Working Group information is available at https://datatracker.ietf.org/wg/nfsv4/ about/. Submit suggestions and changes as pull requests at https://github.com/chucklever/i-d-nfs-ulb-v2. Instructions are on that page. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 14 November 2022. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. Lever Expires 14 November 2022 [Page 1] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Requirements Language . . . . . . . . . . . . . . . . . . . . 3 3. Upper-Layer Binding for NFS Versions 2 and 3 . . . . . . . . 4 3.1. DDP-Eligibility . . . . . . . . . . . . . . . . . . . . . 4 3.2. Reply Size Estimation . . . . . . . . . . . . . . . . . . 5 3.3. RPC Binding Considerations . . . . . . . . . . . . . . . 5 3.4. Transport Considerations . . . . . . . . . . . . . . . . 5 3.4.1. Keep-Alive . . . . . . . . . . . . . . . . . . . . . 6 3.4.2. Replay Detection . . . . . . . . . . . . . . . . . . 6 4. Upper-Layer Bindings for NFS Version 2 and 3 Auxiliary Protocols . . . . . . . . . . . . . . . . . . . . . . . . 7 4.1. MOUNT, NLM, and NSM Protocols . . . . . . . . . . . . . . 7 4.2. NFSACL Protocol . . . . . . . . . . . . . . . . . . . . . 7 5. Upper-Layer Binding For NFS Version 4 . . . . . . . . . . . . 8 5.1. DDP-Eligibility . . . . . . . . . . . . . . . . . . . . . 8 5.1.1. The NFSv4.2 READ_PLUS operation . . . . . . . . . . . 8 5.1.2. NFS Version 4 COMPOUND Requests . . . . . . . . . . . 9 5.2. Reply Size Estimation . . . . . . . . . . . . . . . . . . 11 5.2.1. Reply Size Estimation for Minor Version 0 . . . . . . 11 5.2.2. Reply Size Estimation for Minor Version 1 and Newer . . . . . . . . . . . . . . . . . . . . . . . . 12 5.3. RPC Binding Considerations . . . . . . . . . . . . . . . 12 5.4. Transport Considerations . . . . . . . . . . . . . . . . 12 5.4.1. Congestion Avoidance . . . . . . . . . . . . . . . . 12 5.4.2. Retransmission and Keep-alive . . . . . . . . . . . . 13 5.5. Session-Related Considerations . . . . . . . . . . . . . 13 6. Upper-Layer Binding For NFS Version 4 Callbacks . . . . . . . 14 6.1. NFS Version 4.0 Callback . . . . . . . . . . . . . . . . 14 6.2. NFS Version 4.1 Callback . . . . . . . . . . . . . . . . 15 7. Extending NFS Upper-Layer Bindings . . . . . . . . . . . . . 15 8. Security Considerations . . . . . . . . . . . . . . . . . . . 15 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 16 10. References . . . . . . . . . . . . . . . . . . . . . . . . . 16 10.1. Normative References . . . . . . . . . . . . . . . . . . 16 10.2. Informative References . . . . . . . . . . . . . . . . . 17 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 18 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 18 Lever Expires 14 November 2022 [Page 2] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 1. Introduction The RPC-over-RDMA version 2 transport can employ direct data placement to convey data payloads associated with RPC transactions, as described in [I-D.ietf-nfsv4-rpcrdma-version-two]. As mandated by that document, RPC client and server implementations using RPC-over- RDMA version 2 MUST agree in advance which XDR data items and RPC procedures are eligible for direct data placement (DDP). An Upper-Layer Binding specifies this agreement for one or more versions of one RPC program. Other operational details, such as RPC binding assignments, pairing Write chunks with result data items, and reply size estimation, are also specified by such a Binding. This document contains material required of Upper-Layer Bindings, as specified in Appendix A of [I-D.ietf-nfsv4-rpcrdma-version-two], for the following NFS protocol versions: * NFS version 2 [RFC1094] * NFS version 3 [RFC1813] * NFS version 4.0 [RFC7530] * NFS version 4.1 [RFC8881] * NFS version 4.2 [RFC7862] The current document also provides Upper-Layer Bindings for auxiliary protocols used with NFS versions 2 and 3 (see Section 4). This document assumes the reader is already familiar with concepts and terminology defined throughout [I-D.ietf-nfsv4-rpcrdma-version-two] and the documents it references. 2. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. Lever Expires 14 November 2022 [Page 3] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 3. Upper-Layer Binding for NFS Versions 2 and 3 The Upper-Layer Binding specification in this section applies to NFS version 2 [RFC1094] and NFS version 3 [RFC1813]. For brevity, in this document, a "Legacy NFS client" refers to an NFS client using version 2 or version 3 of the NFS RPC program (100003) to communicate with an NFS server. Likewise, a "Legacy NFS server" is an NFS server communicating with clients using NFS version 2 or NFS version 3. 3.1. DDP-Eligibility Generally, storage protocols based on RDMA divide both read and write operations into two steps. This division enables the payload receiver to allocate the sink buffer for each I/O operation in advance of the network payload transfer. By allocating the sink buffer tactically, a good quality receiver implementation reduces the amount of data movement it must perform during and after the I/O operation. During an NFS WRITE that involves explicit RDMA, first the NFS client sends a request that indicates where the NFS server can find the payload buffer, then the NFS server pulls the WRITE payload from that buffer. Likewise, during an NFS READ that involves explicit RDMA, the NFS client provides the location of the destination buffer, then the NFS server pushes the READ payload to that buffer. Therefore, the following XDR data items in NFS versions 2 and 3 are DDP-eligible: * The opaque file data argument in the NFS WRITE procedure * The pathname argument in the NFS SYMLINK procedure * The opaque file data result in the NFS READ procedure * The pathname result in the NFS READLINK procedure All other argument or result data items in NFS versions 2 and 3 are not DDP-eligible. Regardless of whether an NFS operation is considered non-idempotent, a transport error might not indicate whether the server has processed the arguments of the RPC Call or whether the server has accessed or modified client memory associated with that RPC. Lever Expires 14 November 2022 [Page 4] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 3.2. Reply Size Estimation During the construction of each RPC Call message, a Requester is responsible for allocating appropriate RDMA resources to receive the corresponding Reply message. These resources must be capable of holding the entire Reply. Therefore the Requester needs to estimate the maximum possible size of the expected Reply message. * Often, the expected Reply can fit in a limited number of RDMA Send messages. The Requester need not provision any RDMA resources for the Reply, relying instead on message continuation to handle the entire Reply message. * In cases where the Upper Layer Binding permits direct data placement of the results (DDP), a Requester can provision Write chunks to receive those results. The Requester MUST reliably estimate the maximum size of each result receive via a Write chunk. * A Requester that expects a large Reply message can provision a Reply chunk. The Requester MUST reliably estimate the maximum size of the payload received via the Reply chunk. * If RDMA resources are not available to send a Reply, a Responder falls back to message continuation. A correctly implemented Legacy NFS client thus avoids retransmission of non-idempotent NFS requests due to improperly estimated Reply resources. 3.3. RPC Binding Considerations Legacy NFS servers typically listen for clients on UDP and TCP port 2049. Additionally, they register these ports with a local portmapper service [RFC1833]. A Legacy NFS server supporting RPC-over-RDMA version 2 and registering itself with the RPC portmapper MAY choose an arbitrary port or MAY use the alternative well-known port number for its RPC- over-RDMA service (see Section 9). The chosen port MAY be registered with the RPC portmapper using the netids assigned in Section 12 of [I-D.ietf-nfsv4-rpcrdma-version-two]. 3.4. Transport Considerations Lever Expires 14 November 2022 [Page 5] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 3.4.1. Keep-Alive Legacy NFS client implementations can rely on connection keep-alive to detect when a Legacy NFS server has become unresponsive. When an NFS server is no longer responsive, client-side keep-alive terminates the connection, triggering reconnection and retransmission of outstanding RPC transactions. Some RDMA transports (such as the Reliable Connected QP type on InfiniBand) have no keep-alive mechanism. Without a disconnect or new RPC traffic, such connections can remain alive long after an NFS server has become unresponsive or unreachable. Once an NFS client has consumed all available RPC-over-RDMA version 2 credits on that transport connection, it awaits a reply indefinitely before sending another RPC request. Legacy NFS clients SHOULD reserve one RPC-over-RDMA version 2 credit to use for periodic server or connection health assessment. Either peer can use this credit to drive an RPC request on an otherwise idle connection, triggering either an affirmative server response or a connection termination. 3.4.2. Replay Detection Like NFSv4.0, Legacy NFS servers typically employ request replay detection to reduce the risk of data and file namespace corruption that could result when an NFS client retransmits a non-idempotent NFS request. A Legacy NFS server can send a cached response when a replay is detected, rather than executing the request again. Replay detection is not perfect, but it is usually adequate. For Legacy NFS servers, replay detection commonly utilizes heuristic indicators such as the IP address of the NFS client, the source port of the connection, the transaction ID of the request, and the contents of the request's RPC and upper-layer protocol headers. A Legacy NFS client is careful to re-use the same source port when reconnecting so that Legacy NFS servers can better detect RPC retransmission. However, a Legacy NFS client operating over an RDMA transport has no control over connection source ports. It is almost certain that an RPC request retransmitted on a new connection can never be detected as a replay if the receiving Legacy NFS server includes the connection source port in its replay detection heuristics. Therefore a Legacy NFS server using an RDMA transport should never use a connection's source port as part of its NFS request replay detection mechanism. Lever Expires 14 November 2022 [Page 6] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 4. Upper-Layer Bindings for NFS Version 2 and 3 Auxiliary Protocols Storage administrators typically deploy NFS versions 2 and 3 with several other protocols, sometimes called the "NFS auxiliary protocols." These are distinct RPC programs that define procedures not part of the NFS RPC program (100003). The Upper-Layer Bindings in this section apply to: * Versions 2 and 3 of the MOUNT RPC program (100005) [RFC1813] * Versions 1, 3, and 4 of the NLM RPC program (100021) [RFC1813] * Version 1 of the NSM RPC program (100024), described in Chapter 11 of [XNFS] * Versions 2 and 3 of the NFSACL RPC program (100227). The NFSACL program does not have a public definition. This document treats the NFSACL program as a de facto standard, as there are several interoperating implementations. 4.1. MOUNT, NLM, and NSM Protocols Historically, NFS/RDMA implementations have conveyed the MOUNT, NLM, and NSM protocols via TCP. A Legacy NFS server implementation MUST provide support for these auxiliary protocols via TCP. Moreover, there is little benefit from transporting these protocols via RDMA. Thus this document does not provide an Upper-Layer binding for them. 4.2. NFSACL Protocol Legacy NFS clients and servers convey NFSACL procedures on the same transport connection and port as the NFS RPC program (100003). Utilizing the same port obviates the need for a separate rpcbind query to discover server support for this RPC program. ACLs are typically small, but even large ACLs must be encoded and decoded to some degree before being being stored in local filesystems. Thus no data item in this Upper-Layer Protocol is DDP- eligible. For procedures whose replies do not include an ACL object, the size of each Reply is determined directly from the NFSACL RPC program's XDR definition. Lever Expires 14 November 2022 [Page 7] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 The NFSACL protocol does not provide a mechanism to determine the size of a received ACL in advance. When preparing for responses that include ACLs, Legacy NFS clients estimate a maximum reply size based on limits within their local file systems. If that estimation is inadequate, a Responder falls back to message continuation. 5. Upper-Layer Binding For NFS Version 4 The Upper-Layer Binding specification in this section applies to versions of the NFS RPC program defined in NFS version 4.0 [RFC7530], NFS version 4.1 [RFC8881], and NFS version 4.2 [RFC7862]. 5.1. DDP-Eligibility Only the following XDR data items in the COMPOUND procedure of all NFS version 4 minor versions are DDP-eligible: * The opaque data field in the WRITE4args structure * The linkdata field of the NF4LNK arm in the createtype4 union * The opaque data field in the READ4resok structure * The linkdata field in the READLINK4resok structure 5.1.1. The NFSv4.2 READ_PLUS operation NFS version 4.2 introduces an enhanced READ operation called READ_PLUS [RFC7862]. READ_PLUS enables an NFS server to compact returned READ data payloads. No part of a READ_PLUS Reply is DDP- eligible. In a READ_PLUS result, returned file content appears as a list of one or more of the following items: * Regular data content, the same as the result of a traditional READ operation * Unallocated space in a file, where no data has been written, or previously-written data has been removed via a hole-punch operation * A counted pattern Upon receipt of a READ_PLUS result, an NFSv4.2 client expands the returned list into its preferred representation of the original file content. Lever Expires 14 November 2022 [Page 8] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 Before receiving that result, an NFSv4.2 client is unaware of how the NFS server has organized the file content. Thus it is not possible to predict the size or structure of a READ_PLUS Reply in advance. The use of direct data placement is therefore challenging. Moreover, the usual benefits of hardware-assisted data placement are entirely lost if the client must parse the result of each READ I/O. Therefore this Upper Layer Binding does not make elements of an NFSv4.2 READ_PLUS Reply DDP-eligible. Further, this Upper Layer Binding recommends that NFS client implemenations avoid using the READ_PLUS operation on NFS/RDMA mount points. 5.1.2. NFS Version 4 COMPOUND Requests 5.1.2.1. Multiple DDP-eligible Data Items An NFS version 4 COMPOUND procedure can contain more than one operation that carries a DDP-eligible data item. An NFS version 4 client provides XDR Position values in each Read chunk to determine which chunk is associated with which argument data item. However, NFS version 4 server and client implementations must agree on how to pair Write chunks with returned result data items. A "READ operation" refers to any NFS version 4 operation with a DDP- eligible result data item in the following lists. An NFS version 4 client applies the mechanism specified in Section 4.3.2 of [I-D.ietf-nfsv4-rpcrdma-version-two] to this class of operations as follows: * If an NFS version 4 client wishes all DDP-eligible items in an NFS reply to be conveyed inline, it leaves the Write list empty. An NFS version 4 server acts as follows: * The first READ operation MUST use the first chunk in the Write list in an NFS version 4 COMPOUND procedure. The next READ operation uses the next Write chunk, and so on. * If an NFS version 4 client has provided a matching non-empty Write chunk, then the corresponding READ operation MUST return its DDP- eligible data item using that chunk. * If an NFS version 4 client has provided an empty matching Write chunk, then the corresponding READ operation MUST return all of its result data items inline. Lever Expires 14 November 2022 [Page 9] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 * If a READ operation returns a union arm which does not contain a DDP-eligible result, and the NFS version 4 client has provided a matching non-empty Write chunk, an NFS version 4 server MUST return an empty Write chunk in that Write list position. * If there are more READ operations than Write chunks, then remaining NFS Read operations in an NFS version 4 COMPOUND that have no matching Write chunk MUST return their results inline. 5.1.2.2. Chunk List Complexity By default, the RPC-over-RDMA version 2 protocol limits the number of chunks or segments that may appear in Read or Write lists (see Section 5.2 of [I-D.ietf-nfsv4-rpcrdma-version-two]). These implementation limits are significant when Kerberos integrity or privacy is in use [RFC7861]. GSS services increase the size of credential material in RPC headers, potentially requiring the more frequent use of less efficient Special Payload or Continued Payload messages. NFS version 4 clients follow the prescriptions listed below when constructing RPC-over-RDMA version 2 messages in the absence of an explicit transport property exchange that alters these limits. NFS version 4 servers MUST accept and process all such requests. * The Read list can contain either a Call chunk, no more than one Read chunk, or both a Call chunk and one Read chunk. * The Write list can contain no more than one Write chunk. NFS version 4 clients wishing to send more complex chunk lists can use transport properties to bound the complexity of NFS version 4 COMPOUNDs, limit the number of elements in scatter-gather operations, and avoid other sources of chunk overruns at the receiving peer. 5.1.2.3. NFS Version 4 COMPOUND Example The following example shows a Write list with three Write chunks, A, B, and C. The NFS version 4 server consumes the provided Write chunks by writing the results of the designated operations in the compound request (READ and READLINK) back to each chunk. Lever Expires 14 November 2022 [Page 10] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 Write list: A --> B --> C NFS version 4 COMPOUND request: PUTFH LOOKUP READ PUTFH LOOKUP READLINK PUTFH LOOKUP READ | | | v v v A B C If the NFS version 4 client does not want the READLINK result returned via RDMA, it provides an empty Write chunk for buffer B to indicate that the READLINK result must be returned inline. 5.2. Reply Size Estimation Within NFS version 4, there are certain variable-length result data items whose maximum size cannot be estimated by clients reliably because there is no protocol-specified size limit on these result arrays. These include: * The attrlist4 field * Fields containing ACLs such as fattr4_acl, fattr4_dacl, and fattr4_sacl * Fields in the fs_locations4 and fs_locations_info4 data structures * Fields which pertain to pNFS layout metadata, such as loc_body, loh_body, da_addr_body, lou_body, lrf_body, fattr_layout_types, and fs_layout_types 5.2.1. Reply Size Estimation for Minor Version 0 The NFS version 4.0 protocol itself does not impose any bound on the size of NFS Calls or Replies. Variable-length fattr4 attributes make it particularly difficult for clients to predict the maximum size of some NFS version 4.0 Replies. Client implementations might rely upon internal architectural limits to constrain the reply size, but such limits are not always reliable. When an NFS version 4.0 client cannot predict the size of a Reply, it can rely on message continuation to enable a Reply under any circumstances. Lever Expires 14 November 2022 [Page 11] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 5.2.2. Reply Size Estimation for Minor Version 1 and Newer In NFS version 4.1 and newer minor versions, the csa_fore_chan_attrs argument of the CREATE_SESSION operation contains a ca_maxresponsesize field. The value in this field is the absolute maximum size of replies generated by an NFS version 4.1 server. An NFS version 4 client can use this value when it is impossible to estimate a reply size upper bound precisely. In practice, objects such as ACLs, named attributes, layout bodies, and security labels are much smaller than this maximum. 5.3. RPC Binding Considerations NFS version 4 servers are required to listen on TCP port 2049 and are not required to register with an rpcbind service [RFC7530]. Therefore, an NFS version 4 server supporting RPC-over-RDMA version 2 MUST use the alternative well-known port number for its RPC-over-RDMA service defined in Section 9. 5.4. Transport Considerations 5.4.1. Congestion Avoidance Section 3.1 of [RFC7530] states: Where an NFS version 4 implementation supports operation over the IP network protocol, the supported transport layer between NFS and IP MUST be an IETF standardized transport protocol that is specified to avoid network congestion; such transports include TCP and the Stream Control Transmission Protocol (SCTP). Section 2.9.1 of [RFC8881] further states: Even if NFS version 4.1 is used over a non-IP network protocol, it is RECOMMENDED that the transport support congestion control. It is permissible for a connectionless transport to be used under NFS version 4.1; however, reliable and in-order delivery of data combined with congestion control by the connectionless transport is REQUIRED. As a consequence, UDP by itself MUST NOT be used as an NFS version 4.1 transport. RPC-over-RDMA version 2 utilizes only reliable, connection-oriented transports that guarantee in-order delivery, meeting all the above requirements for NFS version 4.0 and 4.1. See Section 4.2.1 of [I-D.ietf-nfsv4-rpcrdma-version-two] for more details. Lever Expires 14 November 2022 [Page 12] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 5.4.2. Retransmission and Keep-alive NFS version 4 client implementations often rely on a transport-layer connection keep-alive mechanism to detect when an NFS version 4 server has become unresponsive. When an NFS server is no longer responsive, client-side keep-alive terminates the connection, triggering reconnection and RPC retransmission. Some RDMA transports (such as the Reliable Connected QP type on InfiniBand) have no keep-alive mechanism. Without a disconnect or new RPC traffic, such connections can remain alive long after an NFS server has become unresponsive. Once an NFS client has consumed all available RPC-over-RDMA version 2 credits on that transport connection, it indefinitely awaits a reply before sending another RPC request. NFS version 4 peers SHOULD reserve one RPC-over-RDMA version 2 credit for periodic server or connection health assessment. Either peer can use this credit to drive an RPC request on an otherwise idle connection, triggering either a quick affirmative server response or immediate connection termination. In addition to network partition and request loss scenarios, RPC- over-RDMA version 2 peers can terminate a connection when a Transport header is malformed or when too many RPC-over-RDMA messages are sent without a credit update. In such cases: * If a transport error occurs (e.g., an RDMA2_ERROR type message is received) just before the disconnect or instead of a disconnect, the Requester MUST respond to that error as prescribed by the specification of the RPC transport. Then the NFS version 4 rules for handling retransmission apply. * If there is a transport disconnect and the Responder has provided no other response for a request, then only the NFS version 4 rules for handling retransmission apply. 5.5. Session-Related Considerations The presence of an NFS version 4 session (as defined in [RFC8881]) does not affect the operation of RPC-over-RDMA version 2. None of the operations introduced to support NFS sessions (e.g., the SEQUENCE operation) contain DDP-eligible data items. There is no need to match the number of session slots with the available RPC-over-RDMA version 2 credits. Lever Expires 14 November 2022 [Page 13] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 However, there are a few new cases where an RPC transaction can fail. For example, a Requester might receive, in response to an RPC request, an RDMA2_ERROR message with a rdma_err value of RDMA2_ERR_BADXDR. These situations are not different from existing RPC errors, which an NFS session implementation can already handle for other transport types. Moreover, there might be no SEQUENCE result available to the Requester to distinguish whether failure occurred before or after the Responder executed the requested operations. When a transport error occurs (e.g., an RDMA2_ERROR type message is received), the Requester proceeds, as usual, to match the incoming XID value to a waiting RPC Call. The Requester terminates the RPC transaction and reports the result status to the RPC consumer. The Requester's session implementation then determines the session ID and slot for the failed request and performs slot recovery to make that slot usable again. Otherwise, that slot is rendered permanently unavailable. When an NFS session is not present (for example, when NFS version 4.0 is in use), a transport error does not indicate whether the server has processed the arguments of the RPC Call, or whether the server has accessed or modified client memory associated with that RPC. 6. Upper-Layer Binding For NFS Version 4 Callbacks The NFS version 4 family of protocols supports server-initiated callbacks to notify NFS version 4 clients of events such as recalled delegations. 6.1. NFS Version 4.0 Callback An NFS version 4.0 client uses the SETCLIENTID operation for advertising the IP address, port, and netid of its NFS version 4.0 callback service. When an NFS version 4.0 server provides a backchannel service to an NFS version 4.0 client that uses RPC-over- RDMA version 2 for its forward channel, the server MUST advertise the backchannel service using either the "tcp" or "tcp6" netid. Because the NFSv4.0 backchannel does not operate on RPC-over-RDMA, this document does not specify an Upper-Layer binding for the NFSv4.0 backchannel RPC program. Lever Expires 14 November 2022 [Page 14] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 6.2. NFS Version 4.1 Callback In NFS version 4.1 and newer minor versions, callback operations may appear on the same connection that is in use for NFS version 4 forward channel client requests. NFS version 4 clients and servers MUST use the mechanisms described in Section 4.5 of [I-D.ietf-nfsv4-rpcrdma-version-two] to convey backchannel operations on an RPC-over-RDMA version 2 transport. The csa_back_chan_attrs argument of the CREATE_SESSION operation contains a ca_maxresponsesize field. The value in this field is the absolute maximum size of backchannel replies generated by a replying NFS version 4 client. There are no DDP-eligible data items in callback procedures defined in NFS version 4.1 or NFS version 4.2. However, some callback operations, such as messages that convey device ID information, can be sizeable. A sender can use Message Continuation or a Special Payload message in this situation. When an NFS version 4.1 client can support Special Payload Calls in its backchannel, it reports a backchannel ca_maxrequestsize that is larger than the connection's inline thresholds. Otherwise, an NFS version 4 server MUST use only Simple Payload or Continued Payload messages to convey backchannel operations. 7. Extending NFS Upper-Layer Bindings RPC programs such as NFS must have an Upper-Layer Binding specification to operate on an RPC-over-RDMA version 2 transport [I-D.ietf-nfsv4-rpcrdma-version-two]. Via standards action, the Upper-Layer Binding specified in this document can be extended to cover versions of the NFS version 4 protocol specified after NFS version 4 minor version 2, or to cover separately published extensions to an existing NFS version 4 minor version, as described in [RFC8178]. 8. Security Considerations RPC-over-RDMA version 2 supports all RPC security models, including RPCSEC_GSS security and transport-level security [RFC7861]. The choice of what Direct Data Placement mechanism to convey RPC argument and results does not affect this since it changes only the method of data transfer. Because the current document defines only the binding of the NFS protocols atop RPC-over-RDMA version 2 [I-D.ietf-nfsv4-rpcrdma-version-two], all relevant security considerations are, therefore, described at that layer. Lever Expires 14 November 2022 [Page 15] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 9. IANA Considerations The use of direct data placement in NFS introduces a need for an additional port number assignment for networks that share traditional UDP and TCP port spaces with RDMA services. The DDP protocol is such an example [RFC5041]. For this purpose, the current document lists a set of port number assignments that IANA has already assigned for NFS/RDMA in the IANA port registry, according to the guidelines described in [RFC6335]. nfsrdma 20049/tcp Network File System (NFS) over RDMA nfsrdma 20049/udp Network File System (NFS) over RDMA nfsrdma 20049/sctp Network File System (NFS) over RDMA The author requests that IANA add the current document as a reference for the existing nfsrdma port assignments. This document does not alter these assignments. 10. References 10.1. Normative References [I-D.ietf-nfsv4-rpcrdma-version-two] Lever, C. and D. Noveck, "RPC-over-RDMA Version 2 Protocol", Work in Progress, Internet-Draft, draft-ietf- nfsv4-rpcrdma-version-two-06, 2 January 2022, . [RFC1833] Srinivasan, R., "Binding Protocols for ONC RPC Version 2", RFC 1833, DOI 10.17487/RFC1833, August 1995, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC6335] Cotton, M., Eggert, L., Touch, J., Westerlund, M., and S. Cheshire, "Internet Assigned Numbers Authority (IANA) Procedures for the Management of the Service Name and Transport Protocol Port Number Registry", BCP 165, RFC 6335, DOI 10.17487/RFC6335, August 2011, . Lever Expires 14 November 2022 [Page 16] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 [RFC7530] Haynes, T., Ed. and D. Noveck, Ed., "Network File System (NFS) Version 4 Protocol", RFC 7530, DOI 10.17487/RFC7530, March 2015, . [RFC7861] Adamson, A. and N. Williams, "Remote Procedure Call (RPC) Security Version 3", RFC 7861, DOI 10.17487/RFC7861, November 2016, . [RFC7862] Haynes, T., "Network File System (NFS) Version 4 Minor Version 2 Protocol", RFC 7862, DOI 10.17487/RFC7862, November 2016, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8881] Noveck, D., Ed. and C. Lever, "Network File System (NFS) Version 4 Minor Version 1 Protocol", RFC 8881, DOI 10.17487/RFC8881, August 2020, . 10.2. Informative References [RFC1094] Nowicki, B., "NFS: Network File System Protocol specification", RFC 1094, DOI 10.17487/RFC1094, March 1989, . [RFC1813] Callaghan, B., Pawlowski, B., and P. Staubach, "NFS Version 3 Protocol Specification", RFC 1813, DOI 10.17487/RFC1813, June 1995, . [RFC5041] Shah, H., Pinkerton, J., Recio, R., and P. Culley, "Direct Data Placement over Reliable Transports", RFC 5041, DOI 10.17487/RFC5041, October 2007, . [RFC8178] Noveck, D., "Rules for NFSv4 Extensions and Minor Versions", RFC 8178, DOI 10.17487/RFC8178, July 2017, . [XNFS] The Open Group, "Protocols for Interworking: XNFS, Version 3W", January 1998. Lever Expires 14 November 2022 [Page 17] Internet-Draft NFS on RPC-Over-RDMA V2 May 2022 Acknowledgments Thanks to Tom Talpey, who contributed the text of Section 5.1.2.2. David Noveck contributed the text of Section 5.5 and Section 7. The author also wishes to thank Bill Baker and Greg Marsden for their support of this work. Special thanks go to Transport Area Directors Zaheduzzaman Sarker, NFSV4 Working Group Chairs Brian Pawlowski, and David Noveck, and NFSV4 Working Group Secretary Thomas Haynes for their support. Author's Address Charles Lever Oracle Corporation United States of America Email: chuck.lever@oracle.com Lever Expires 14 November 2022 [Page 18]