Calendaring Extensions R. Stepanek Internet-Draft FastMail Intended status: Standards Track M. Loffredo Expires: 12 January 2023 IIT-CNR 11 July 2022 JSContact: A JSON representation of contact data draft-ietf-calext-jscontact-03 Abstract This specification defines a data model and JSON representation of contact card information that can be used for data storage and exchange in address book or directory applications. It aims to be an alternative to the vCard data format and to be unambiguous, extendable and simple to process. In contrast to the JSON-based jCard format, it is not a direct mapping from the vCard data model and expands semantics where appropriate. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 12 January 2023. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. Stepanek & Loffredo Expires 12 January 2023 [Page 1] Internet-Draft JSContact July 2022 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Relation to the xCard and jCard formats . . . . . . . . . 4 1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 4 1.3. Vendor-specific Property Extensions and Values . . . . . 4 1.4. Type Signatures . . . . . . . . . . . . . . . . . . . . . 5 1.5. Data types . . . . . . . . . . . . . . . . . . . . . . . 5 1.5.1. Context . . . . . . . . . . . . . . . . . . . . . . . 5 1.5.2. Id . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.5.3. PatchObject . . . . . . . . . . . . . . . . . . . . . 6 1.5.4. Preference . . . . . . . . . . . . . . . . . . . . . 7 1.5.5. UnsignedInt . . . . . . . . . . . . . . . . . . . . . 7 1.5.6. UTCDateTime . . . . . . . . . . . . . . . . . . . . . 8 2. Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.1. Metadata properties . . . . . . . . . . . . . . . . . . . 8 2.1.1. @type . . . . . . . . . . . . . . . . . . . . . . . . 8 2.1.2. uid . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.1.3. prodId . . . . . . . . . . . . . . . . . . . . . . . 8 2.1.4. created . . . . . . . . . . . . . . . . . . . . . . . 8 2.1.5. updated . . . . . . . . . . . . . . . . . . . . . . . 9 2.1.6. kind . . . . . . . . . . . . . . . . . . . . . . . . 9 2.1.7. relatedTo . . . . . . . . . . . . . . . . . . . . . . 9 2.1.8. locale . . . . . . . . . . . . . . . . . . . . . . . 10 2.2. Name and Organization properties . . . . . . . . . . . . 10 2.2.1. name . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2.2. fullName . . . . . . . . . . . . . . . . . . . . . . 11 2.2.3. nickNames . . . . . . . . . . . . . . . . . . . . . . 11 2.2.4. organizations . . . . . . . . . . . . . . . . . . . . 12 2.2.5. titles . . . . . . . . . . . . . . . . . . . . . . . 12 2.2.6. speakToAs . . . . . . . . . . . . . . . . . . . . . . 12 2.3. Contact and Resource properties . . . . . . . . . . . . . 13 2.3.1. emails . . . . . . . . . . . . . . . . . . . . . . . 13 2.3.2. phones . . . . . . . . . . . . . . . . . . . . . . . 14 2.3.3. onlineServices . . . . . . . . . . . . . . . . . . . 15 2.3.4. resources . . . . . . . . . . . . . . . . . . . . . . 15 2.3.5. scheduling . . . . . . . . . . . . . . . . . . . . . 17 2.3.6. photos . . . . . . . . . . . . . . . . . . . . . . . 17 2.3.7. preferredContactMethod . . . . . . . . . . . . . . . 18 Stepanek & Loffredo Expires 12 January 2023 [Page 2] Internet-Draft JSContact July 2022 2.3.8. preferredContactLanguages . . . . . . . . . . . . . . 18 2.4. Address and Location properties . . . . . . . . . . . . . 18 2.4.1. addresses . . . . . . . . . . . . . . . . . . . . . . 18 2.5. Multilingual properties . . . . . . . . . . . . . . . . . 20 2.5.1. localizations . . . . . . . . . . . . . . . . . . . . 20 2.6. Additional properties . . . . . . . . . . . . . . . . . . 21 2.6.1. anniversaries . . . . . . . . . . . . . . . . . . . . 21 2.6.2. personalInfo . . . . . . . . . . . . . . . . . . . . 22 2.6.3. notes . . . . . . . . . . . . . . . . . . . . . . . . 22 2.6.4. categories . . . . . . . . . . . . . . . . . . . . . 22 2.6.5. timeZones . . . . . . . . . . . . . . . . . . . . . . 22 3. CardGroup . . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.1. Group properties . . . . . . . . . . . . . . . . . . . . 23 3.1.1. @type . . . . . . . . . . . . . . . . . . . . . . . . 23 3.1.2. uid . . . . . . . . . . . . . . . . . . . . . . . . . 23 3.1.3. members . . . . . . . . . . . . . . . . . . . . . . . 23 3.1.4. name . . . . . . . . . . . . . . . . . . . . . . . . 23 3.1.5. card . . . . . . . . . . . . . . . . . . . . . . . . 23 4. Implementation Status . . . . . . . . . . . . . . . . . . . . 23 4.1. IIT-CNR/Registro.it . . . . . . . . . . . . . . . . . . . 24 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 24 6. Security Considerations . . . . . . . . . . . . . . . . . . . 24 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 24 7.1. Normative References . . . . . . . . . . . . . . . . . . 24 7.2. Informative References . . . . . . . . . . . . . . . . . 26 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 27 1. Introduction This document defines a data model for contact card data normally used in address book or directory applications and services. It aims to be an alternative to the vCard data format [RFC6350] and to provide a JSON-based standard representation of contact card data. The key design considerations for this data model are as follows: * Most of the initial set of attributes should be taken from the vCard data format [RFC6350] and extensions ([RFC6473], [RFC6474], [RFC6715], [RFC6869], [RFC8605]). The specification should add new attributes or value types, or not support existing ones, where appropriate. Conversion between the data formats need not fully preserve semantic meaning. * The attributes of the cards data represented must be described as a simple key-value pair, reducing complexity of its representation. Stepanek & Loffredo Expires 12 January 2023 [Page 3] Internet-Draft JSContact July 2022 * The data model should avoid all ambiguities and make it difficult to make mistakes during implementation. * Extensions, such as new properties and components, MUST NOT lead to requiring an update to this document. The representation of this data model is defined in the I-JSON format [RFC7493], which is a strict subset of the JavaScript Object Notation (JSON) Data Interchange Format [RFC8259]. Using JSON is mostly a pragmatic choice: its widespread use makes Card easier to adopt, and the availability of production-ready JSON implementations eliminates a whole category of parser-related interoperability issues. 1.1. Relation to the xCard and jCard formats The xCard [RFC6351] and jCard [RFC7095] specifications define alternative representations for vCard data, in XML and JSON format respectively. Both explicitly aim to not change the underlying data model. Accordingly, they are regarded as equal to vCard in the context of this document. 1.2. Terminology The key words MUST, MUST NOT, REQUIRED, SHALL, SHALL NOT, SHOULD, SHOULD NOT, RECOMMENDED, NOT RECOMMENDED, MAY, and OPTIONAL in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 1.3. Vendor-specific Property Extensions and Values Vendors MAY add additional properties to the contact object to support their custom features. To avoid conflict, the names of these properties MUST be prefixed by a domain name controlled by the vendor followed by a colon, e.g., "example.com:customprop". If the value is a new JSContact object, it either MUST include an "@type" property, or it MUST explicitly be specified to not require a type designator. The type name MUST be prefixed with a domain name controlled by the vendor. Some JSContact properties allow vendor-specific value extensions. Such vendor-specific values MUST be prefixed by a domain name controlled by the vendor followed by a colon, e.g., "example.com:customrel". Vendors are strongly encouraged to register any new property values or extensions that are useful to other systems as well, rather than use a vendor-specific prefix. Stepanek & Loffredo Expires 12 January 2023 [Page 4] Internet-Draft JSContact July 2022 1.4. Type Signatures Type signatures are given for all JSON values in this document. The following conventions are used: * * - The type is undefined (the value could be any type, although permitted values may be constrained by the context of this value). * String - The JSON string type. * Number - The JSON number type. * Boolean - The JSON boolean type. * A[B] - A JSON object where the keys are all of type A, and the values are all of type B. * A[] - An array of values of type A. * A|B - The value is either of type A or of type B. 1.5. Data types In addition to the standard JSON data types, a couple of additional data types are common to the definitions of JSContact objects and properties. 1.5.1. Context Contact information typically is associated with a context in which it should be used. For example, someone might have distinct phone numbers for work and private contexts. The Context data type enumerates common contexts. Common context values are: * private: The contact information may be used to contact the card holder in a private context. * work: The contact information may be used to contact the card holder in a professional context. Additional allowed values may be defined in the properties or data types that make use of the Context data type, registered in a future RFC, or a vendor-specific value. Stepanek & Loffredo Expires 12 January 2023 [Page 5] Internet-Draft JSContact July 2022 1.5.2. Id Where Id is given as a data type, it means a String of at least 1 and a maximum of 255 octets in size, and it MUST only contain characters from the URL and Filename Safe base64url alphabet, as defined in Section 5 of [RFC4648], excluding the pad character (=). This means the allowed characters are the ASCII alphanumeric characters (A-Za- z0-9), hyphen (-), and underscore (_). In many places in JSContact a JSON map is used where the map keys are of type Id and the map values are all the same type of object. This construction represents an unordered set of objects, with the added advantage that each entry has a name (the corresponding map key). This allows for more concise patching of objects, and, when applicable, for the objects in question to be referenced from other objects within the JSContact object. The map keys MUST be preserved across multiple versions of the JSCalendar object. Unless otherwise specified for a particular property, there are no uniqueness constraints on an Id value (other than, of course, the requirement that you cannot have two values with the same key within a single JSON map). For example, two Card objects might use the same Ids in their respective photos properties. Or within the same Card object the same Id could appear in the emails and phones properties. These situations do not imply any semantic connections among the objects. 1.5.3. PatchObject A PatchObject is of type String[*], and represents an unordered set of patches on a JSON object. Each key is a path represented in a subset of JSON pointer format [RFC6901]. The paths have an implicit leading /, so each key is prefixed with / before applying the JSON pointer evaluation algorithm. A patch within a PatchObject is only valid if all of the following conditions apply: 1. The pointer MUST NOT reference inside an array (i.e., you MUST NOT insert/delete from an array; the array MUST be replaced in its entirety instead). 2. All parts prior to the last (i.e., the value after the final slash) MUST already exist on the object being patched. 3. There MUST NOT be two patches in the PatchObject where the pointer of one is the prefix of the pointer of the other, e.g., addresses/1/city and addresses. Stepanek & Loffredo Expires 12 January 2023 [Page 6] Internet-Draft JSContact July 2022 4. The value for the patch MUST be valid for the property being set (of the correct type and obeying any other applicable restrictions), or if null the property MUST be optional. The value associated with each pointer determines how to apply that patch: * If null, remove the property from the patched object. If the key is not present in the parent, this a no-op. * If non-null, set the value given as the value for this property (this may be a replacement or addition to the object being patched). A PatchObject does not define its own @type property. Instead, a @type property in a patch MUST be handled as any other patched property value. Implementations MUST reject in its entirety a PatchObject if any of its patches is invalid. Implementations MUST NOT apply partial patches. 1.5.4. Preference This data type allows to define a preference order on same-typed contact information. For example, a card holder may have two email addresses and prefer to be contacted with one of them. A preference value MUST be an integer number in the range 1 and 100. Lower values correspond to a higher level of preference, with 1 being most preferred. If no preference is set, then the contact information MUST be interpreted as being least preferred. Note that the preference only is defined in relation to contact information of the same type. For example, the preference orders within emails and phone numbers are indendepent of each other. Also note that the _preferredContactMethod_ property allows to define a preferred contact method across method types. 1.5.5. UnsignedInt Where UnsignedInt is given as a data type, it means an integer in the range 0 <= value <= 2^53-1, represented as a JSON Number. Stepanek & Loffredo Expires 12 January 2023 [Page 7] Internet-Draft JSContact July 2022 1.5.6. UTCDateTime This is a string in [RFC3339] date-time format, with the further restrictions that any letters MUST be in uppercase, and the time offset MUST be the character Z. Fractional second values MUST NOT be included unless non-zero and MUST NOT have trailing zeros, to ensure there is only a single representation for each date-time. For example, 2010-10-10T10:10:10.003Z is conformant, but 2010-10-10T10:10:10.000Z is invalid and is correctly encoded as 2010-10-10T10:10:10Z. 2. Card MIME type: application/jscontact+json;type=card A Card object stores information about a person, organization or company. 2.1. Metadata properties 2.1.1. @type Type: String (mandatory). Specifies the type of this object. This MUST be Card. 2.1.2. uid Type: String (mandatory). An identifier, used to associate the object as the same across different systems, addressbooks and views. [RFC4122] describes a range of established algorithms to generate universally unique identifiers (UUID), and the random or pseudo-random version is recommended. For compatibility with [RFC6350] UIDs, implementations MUST accept both URI and free-form text. 2.1.3. prodId Type: String (optional). The identifier for the product that created the Card object. 2.1.4. created Type: UTCDateTime (optional). Stepanek & Loffredo Expires 12 January 2023 [Page 8] Internet-Draft JSContact July 2022 The date and time when this Card object was created. 2.1.5. updated Type: UTCDateTime (optional). The date and time when the data in this Card object was last modified. 2.1.6. kind Type: String (optional). The kind of the entity the Card represents. The value MUST be either one of the following values, registered in a future RFC, or a vendor-specific value: * individual: a single person * org: an organization * location: a named location * device: a device, such as appliances, computers, or network elements * application: a software application 2.1.7. relatedTo Type: String[Relation] (optional). Relates the object to other Card and CardGroup objects. This is represented as a map, where each key is the uid of the related Card or CardGroup and the value defines the relation. The Relation object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Relation. * relation: String[Boolean] (optional, default: empty Object) Describes how the linked object is related to the linking object. The relation is defined as a set of relation types. If empty, the relationship between the two objects is unspecified. Keys in the set MUST be one of the RELATED property [RFC6350] type parameter values, or an IANA-registered value, or a vendor-specific value. The value for each key in the set MUST be true. Stepanek & Loffredo Expires 12 January 2023 [Page 9] Internet-Draft JSContact July 2022 2.1.8. locale Type: String (optional). This is the language tag, as defined in [RFC5646], that best describes the locale used for text in the card or card group. Note that such values MAY be localized in the localizations property Section 2.5.1. 2.2. Name and Organization properties 2.2.1. name Type: Name (optional). The name of the entity represented by this Card. A Name object has the following properties * @type: Name (mandatory). Specifies the type of this object. This MUST be Name. * components: NameComponent[] (mandatory). The components making up the name. The component list MUST have at least one entry. Name components SHOULD be ordered such that their values joined by whitespace produce a valid full name of this entity. Doing so, implementations MAY ignore any components of type separator. * locale: String (optional). The locale of the name. The value MUST be a language tag as defined [RFC5646]. A NameComponent object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be NameComponent. * value: String (mandatory). The value of this name component. * type: String (mandatory). The type of this name component. The value MUST be either one of the following values, registered in a future RFC, or a vendor-specific value: - prefix. The value is a honorific title(s), e.g. "Mr", "Ms", "Dr". - given. The value is a given name, also known as "first name", "personal name". Stepanek & Loffredo Expires 12 January 2023 [Page 10] Internet-Draft JSContact July 2022 - surname. The value is a surname, also known as "last name", "family name". - middle. The value is a middle name, also known as "additional name". - suffix. The value is a honorific suffix, e.g. "B.A.", "Esq.". - separator. A formatting separator for two name components. The value property of the component includes the verbatim separator, for example a newline character. * nth: UnsignedInt (optional, default: 1). Defines the rank of this name component to other name components of the same type. If set, the property value MUST be higher than or equal to 1. For example, two name components of type surname may have their nth property value set to 1 and 2, respectively. In this case, the first name component defines the surname, and the second name component the secondary surname. Note that this property value does not indicate the order in which to print name components of the same type. Some cultures print the secondary surname before the first surname, others the first before the second. Implementations SHOULD inspect the locale property of the Name object to determine the appropriate formatting. They MAY print name components in order of appearance in the components property of the Name object. 2.2.2. fullName Type: String (optional). The full name (e.g. the personal name and surname of an individual, the name of an organization) of the entity represented by this card. The purpose of this property is to define a name, even if the individual name components are not known. In addition, it is meant to provide alternative versions of the name for internationalisation. Implementations SHOULD prefer using the _name_ property over this one and SHOULD NOT store the concatenated name component values in this property. 2.2.3. nickNames Type: String[] (optional). The nick names of the entity represented by this card. Stepanek & Loffredo Expires 12 January 2023 [Page 11] Internet-Draft JSContact July 2022 2.2.4. organizations Type: Id[Organization] (optional). The companies or organization names and units associated with this card. An Organization object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Organization. * name: String (mandatory). The name of this organization. * units: String[] (optional). Additional levels of organizational unit names. 2.2.5. titles Type : Id[Title] (optional). The job titles or functional positions of the entity represented by this card. A Title has object the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Title. * title: String (mandatory). The title of the entity represented by this card. * organization: Id (optional). The id of the organization in which this title is held. 2.2.6. speakToAs Type: SpeakToAs (optional). Provides information how to address, speak to or refer to the entity that is represented by this card. A SpeakToAs object has the following properties, of which at least one property other than @type MUST be set: * @type: String (mandatory). Specifies the type of this object. This MUST be SpeakToAs. * grammaticalGender: String (optional). Defines which grammatical gender to use in salutations and other grammatical constructs. Allowed values are: - animate Stepanek & Loffredo Expires 12 January 2023 [Page 12] Internet-Draft JSContact July 2022 - female - inanimate - male - neuter Note that the grammatical gender does not allow to infer the gender identities or biological sex of the contact. * pronouns: String (optional). Defines the gender pronouns that the contact chooses to use for themselves. Any value or form is allowed. Examples in English include she/her and they/them/ theirs. The property values SHOULD be localized in the language defined in the language property. They MAY be overridden in the localizations property (Section 2.5.1). 2.3. Contact and Resource properties 2.3.1. emails Type: Id[EmailAddress] (optional). The email addresses to contact the entity represented by this card. An EmailAddress object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be EmailAddress. * email: String (mandatory). The email address. This MUST be an _addr-spec_ value as defined in Section 3.4.1 of [RFC5322]. * contexts: Context[Boolean] (optional) The contexts in which to use this email address. The value for each key in the object MUST be true. * pref: Preference (optional) The preference of this email address in relation to other email addresses. * label: String (optional). A label describing the value in more detail. Stepanek & Loffredo Expires 12 January 2023 [Page 13] Internet-Draft JSContact July 2022 2.3.2. phones Type: Id[Phone] (optional). The phone numbers to contact the entity represented by this card. A Phone object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Phone. * phone: String (mandatory). The phone value, as either a URI or a free-text phone number. Typical URI schemes are the [RFC3966] tel or [RFC3261] sip schemes, but any URI scheme is allowed. * features: String[Boolean] (optional). The set of contact features that this phone number may be used for. The set is represented as an object, with each key being a method type. The value for each key in the object MUST be true. The method type MUST be either one of the following values, registered in a future RFC, or a vendor-specific value: - voice The number is for calling by voice. - fax The number is for sending faxes. - pager The number is for a pager or beeper. - text The number supports text messages (SMS). - cell The number is for a cell phone. - textphone The number is for a device for people with hearing or speech difficulties. - video The number supports video conferencing. * contexts: Context[Boolean] (optional) The contexts in which to use this number. The value for each key in the object MUST be true. * pref: Preference (optional) The preference of this number in relation to other numbers. * label: String (optional). A label describing the value in more detail. Stepanek & Loffredo Expires 12 January 2023 [Page 14] Internet-Draft JSContact July 2022 2.3.3. onlineServices Type: Id[OnlineService] (optional). The online services that are associated with the entity represented by this card. This can be messaging services, social media profiles, and other. An OnlineService object has the following properties, of which at least either the uri property or both the username and service properties MUST be set: * @type: String (mandatory). Specifies the type of this object. This MUST be OnlineService. * service: String (optional). The name of the online service or protocol. This SHOULD be the canonical service name including capitalisation. Examples are GitHub, kakao, Twitter, XMPP. * uri: String (optional). The service-specific URI of the entity represented by this card. * username: String (optional). The service-specific user name of the entity represented by this card. If this property is set, then the service property MUST be set. * contexts: Context[Boolean] (optional) The contexts in which to use this service. The value for each key in the object MUST be true. * pref: Preference (optional) The preference of this service in relation to other services. * label: String (optional). A label describing the value in more detail. 2.3.4. resources Type: Id[Resource] (optional). The digital resources that are associated with the entity represented by this card. A Resource object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Resource. * resource: String (mandatory). The resource value, where the allowed value form is defined by the the _type_ property. If the value form is URI, then the property value MUST be a valid _URI_ as defined in Section 3 of [RFC3986] and updates. In any case the value MUST NOT be empty. Stepanek & Loffredo Expires 12 January 2023 [Page 15] Internet-Draft JSContact July 2022 * type: String (optional). The type of the resource. Allowed values are: - audio The resource is a digital sound URI, such as a recording of proper pronunciation of the name of this card. - calendar The resource is a calendar URI associated with the entity represented by this card. - contact The resource is an alternative contact method URI to contact the entity represented by this card. This typically is a web contact form using the "https" URI scheme, but may be any other. - directory The resource is a directory service where the entity represented by this card is part of. This typically is an organizational directory that also contains associated entities, e.g. co-workers and management in a company directory. The resource value MUST be a URI. - directoryEntry The resource is a directory entry of the entity represented by this card. In contrast to the directory type, this is the specific URI for the entity _within_ a directory. - freeBusy The resource is a free-busy calendaring URI for the entity represented by this card. - logo The resource is a graphic logo URI associated with the entity represented by this card. - publicKey The resorce is a cryptograhic public key or certificate URI associated with the entity represented by this card. - uri The resource value is any URI, e.g. a website link. * mediaType: String (optional). Used for URI resource values. Provides the media type [RFC2046] of the resource identified by the URI. * contexts: Context[Boolean] (optional) The contexts in which to use this resource. The value for each key in the object MUST be true. * pref: Preference (optional) The preference of this resource in relation to other resources. * label: String (optional). A label describing the value in more detail. Stepanek & Loffredo Expires 12 January 2023 [Page 16] Internet-Draft JSContact July 2022 2.3.5. scheduling Type: Id[Scheduling] (optional). The methods by which the entity receives calendar scheduling invitations and updates. A Scheduling object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Scheduling. * sendTo: String[String] (mandatory). The keys in the property value are the available methods for scheduling. The value is a URI for the method specified in the key. This MUST be a valid "sendTo" property value as specified in Section 4.4.6 of [RFC8984] and updates. * pref: Preference (optional) The preference of this scheduling object in relation to other scheduling objects. 2.3.6. photos Type: Id[File] (optional). A map of photo ids to File objects that contain photographs or images associated with this card. A typical use case is to include an avatar for display along the contact name. A File object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be File. * href: String (mandatory). A URI where to fetch the data of this file. * mediaType: String (optional). The content-type of the file, if known. * size: UnsignedInt (optional). The size, in octets, of the file when fully decoded (i.e., the number of octets in the file the user would download), if known. * pref: Preference (optional) The preference of this photo in relation to other photos. * label: String (optional). A label describing the value in more detail. Stepanek & Loffredo Expires 12 January 2023 [Page 17] Internet-Draft JSContact July 2022 2.3.7. preferredContactMethod Type : String (optional) Defines the preferred method to contact the holder of this card. The value MUST be the property names: emails, phones, online. 2.3.8. preferredContactLanguages Type : String[ContactLanguage[]] (optional) Defines the preferred languages for contacting the entity associated with this card. The keys in the object MUST be [RFC5646] language tags. The values are a (possibly empty) list of contact language preferences for this language. A valid ContactLanguage object MUST have at least one of its properties set. A ContactLanguage object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be ContactLanguage. * context: Context (optional). Defines the context in which to use this language. * pref: Preference (optional). Defines the preference of this language in relation to other languages of the same context. Also see the definition of the VCARD LANG property (Section 6.4.4., [RFC6350]). 2.4. Address and Location properties 2.4.1. addresses Type: Id[Address] (optional). A map of address ids to Address objects, containing physical locations. An Address object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Address. * fullAddress: String (optional). The complete address, excluding type and label. This property is mainly useful to represent addresses of which the individual address components are unknown, or to provide localized representations. Stepanek & Loffredo Expires 12 January 2023 [Page 18] Internet-Draft JSContact July 2022 * street: StreetComponent[] (optional). The street address. The concatenation of the component values, separated by whitespace, SHOULD result in a valid street address for the address locale. Doing so, implementations MAY ignore any separator components. The StreetComponent object type is defined in the paragraph below. * locality: String (optional). The city, town, village, post town, or other locality within which the street address may be found. * region: String (optional). The province, such as a state, county, or canton within which the locality may be found. * country: String (optional). The country name. * postcode: String (optional). The postal code, post code, ZIP code or other short code associated with the address by the relevant country's postal system. * countryCode: String (optional). The ISO-3166-1 country code. * coordinates: String (optional) A [RFC5870] "geo:" URI for the address. * timeZone: String (optional) Identifies the time zone this address is located in. This either MUST be a time zone name registered in the IANA Time Zone Database (https://www.iana.org/time-zones), or it MUST be a valid TimeZoneId as defined in [RFC8984]. For the latter, a corresponding time zone MUST be defined in the timeZones property. * contexts: Context[Boolean] (optional). The contexts of the address information. In addition to the common contexts, allowed values are: - billing An address to be used for billing. - postal An address to be used for delivering physical items. The value for each key in the object MUST be true. * pref: Preference (optional) The preference of this address in relation to other addresses. * label: String (optional). A label describing the value in more detail. A StreetComponent object has the following properties: Stepanek & Loffredo Expires 12 January 2023 [Page 19] Internet-Draft JSContact July 2022 * @type: String (mandatory). Specifies the type of this object. This MUST be StreetComponent. * type: String (mandatory). The type of this street component. The value MUST be either one of the following values, registered in a future RFC, or a vendor-specific value: - name. The street name. - number. The street number. - apartment. The apartment number or identifier. - room. The room number or identifier. - extension. The extension designation or box number. - direction. The cardinal direction, e.g. "North". - building. The building or building part this address is located in. - floor. The floor this address is located on. - postOfficeBox. The post office box number or identifier. - separator. A separator for two street components. The value property of the component includes the verbatim separator, for example a newline character. - unknown. A street component value for which no type is known. * value: String (mandatory). The value of this street component. 2.5. Multilingual properties 2.5.1. localizations Type: String[PatchObject] (optional). A map of language tags [RFC5646] to patches, which localize a property value into the locale of the respective language tag. The paths in the PatchObject keys are relative to the Card object that includes the localizations property. A patch MUST NOT target the localizations property. The following example shows a Card object, where one of its addresses Tokyo is localized for the jp locale. Stepanek & Loffredo Expires 12 January 2023 [Page 20] Internet-Draft JSContact July 2022 "@type": "Card", ... "addresses": { "addr1": { "@type": "Address", "locality": "Tokyo", } }, "localizations": { "jp": { "addresses/addr1/locality":"東京" } } Figure 1 2.6. Additional properties 2.6.1. anniversaries Type : Id[Anniversary] (optional). These are memorable dates and events for the entity represented by this card. An Anniversary object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be Anniversary. * type: String (optional). Specifies the type of the anniversary. This RFC predefines the following types, but implementations MAY use additional values: - birth: a birth day anniversary - death: a death day anniversary * date: String (mandatory). The date of this anniversary, in the form "YYYY-MM-DD" (any part may be all 0s for unknown) or a [RFC3339] timestamp. * place: Address (optional). An address associated with this anniversary, e.g. the place of birth or death. * label: String (optional). A label describing the value in more detail. Stepanek & Loffredo Expires 12 January 2023 [Page 21] Internet-Draft JSContact July 2022 2.6.2. personalInfo Type: Id[PersonalInformation] (optional). Defines personal information about the entity represented by this card. A PersonalInformation object has the following properties: * @type: String (mandatory). Specifies the type of this object. This MUST be PersonalInformation. * type: String (mandatory). Specifies the type for this personal information. Allowed values are: - expertise: a field of expertise or credential - hobby: a hobby - interest: an interest * value: String (mandatory). The actual information. This generally is free-text, but future specifications MAY restrict allowed values depending on the type of this PersonalInformation. * level: String (optional) Indicates the level of expertise, or engagement in hobby or interest. Allowed values are: high, medium and low. * label: String (optional). A label describing the value in more detail. 2.6.3. notes Type: String (optional). Arbitrary notes about the entity represented by this card. 2.6.4. categories Type: String[Boolean] (optional). The set of free-text or URI categories that relate to the card. The set is represented as an object, with each key being a category. The value for each key in the object MUST be true. 2.6.5. timeZones Type: String[TimeZone] (optional). Maps identifiers of custom time zones to their time zone definitions. For a description of this property see the timeZones property definition in [RFC8984]. Stepanek & Loffredo Expires 12 January 2023 [Page 22] Internet-Draft JSContact July 2022 3. CardGroup MIME type: application/jscontact+json;type=cardgroup A CardGroup object represents a group of cards. Its members may be Cards or CardGroups. 3.1. Group properties 3.1.1. @type Type: String (mandatory). Specifies the type of this object. This MUST be CardGroup. 3.1.2. uid Type: String (mandatory). The uid of this group. Both CardGroup and Card share the same namespace for the uid property. 3.1.3. members Type: String[Boolean] (mandatory). The members of this group. The set is represented as an object, with each key being the uid of another Card or CardGroup. The value for each key in the object MUST be true. 3.1.4. name Type: String (optional). The user-visible name for the group, e.g. "Friends". This may be any UTF-8 string of at least 1 character in length and maximum 255 octets in size. The same name may be used by two different groups. 3.1.5. card Type: Card (optional). The card that represents this group. 4. Implementation Status NOTE: Please remove this section and the reference to [RFC7942] prior to publication as an RFC. This section records the status of known implementations of the protocol defined by this specification at the time of posting of this Internet-Draft, and is based on a proposal described in [RFC7942]. The description of implementations in this section is intended to assist the IETF in its decision processes in progressing drafts to RFCs. Please note that the listing of any Stepanek & Loffredo Expires 12 January 2023 [Page 23] Internet-Draft JSContact July 2022 individual implementation here does not imply endorsement by the IETF. Furthermore, no effort has been spent to verify the information presented here that was supplied by IETF contributors. This is not intended as, and must not be construed to be, a catalog of available implementations or their features. Readers are advised to note that other implementations may exist. According to [RFC7942], "this will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, which may serve as evidence of valuable experimentation and feedback that have made the implemented protocols more mature. It is up to the individual working groups to use this information as they see fit". 4.1. IIT-CNR/Registro.it * Responsible Organization: Institute of Informatics and Telematics of National Research Council (IIT-CNR)/Registro.it * Location: https://rdap.pubtest.nic.it/ (https://rdap.pubtest.nic.it/) * Description: This implementation includes support for RDAP queries using data from the public test environment of .it ccTLD. The RDAP server returns responses including Card in place of jCard when queries contain the parameter jscard=1. * Level of Maturity: This is an "alpha" test implementation. * Coverage: This implementation includes all of the features described in this specification. * Contact Information: Mario Loffredo, mario.loffredo@iit.cnr.it 5. IANA Considerations TBD 6. Security Considerations TBD 7. References 7.1. Normative References Stepanek & Loffredo Expires 12 January 2023 [Page 24] Internet-Draft JSContact July 2022 [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally Unique IDentifier (UUID) URN Namespace", RFC 4122, DOI 10.17487/RFC4122, July 2005, . [RFC5646] Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646, September 2009, . [RFC5870] Mayrhofer, A. and C. Spanring, "A Uniform Resource Identifier for Geographic Locations ('geo' URI)", RFC 5870, DOI 10.17487/RFC5870, June 2010, . [RFC6350] Perreault, S., "vCard Format Specification", RFC 6350, DOI 10.17487/RFC6350, August 2011, . [RFC6351] Perreault, S., "xCard: vCard XML Representation", RFC 6351, DOI 10.17487/RFC6351, August 2011, . [RFC6901] Bryan, P., Ed., Zyp, K., and M. Nottingham, Ed., "JavaScript Object Notation (JSON) Pointer", RFC 6901, DOI 10.17487/RFC6901, April 2013, . [RFC7095] Kewisch, P., "jCard: The JSON Format for vCard", RFC 7095, DOI 10.17487/RFC7095, January 2014, . [RFC7493] Bray, T., Ed., "The I-JSON Message Format", RFC 7493, DOI 10.17487/RFC7493, March 2015, . Stepanek & Loffredo Expires 12 January 2023 [Page 25] Internet-Draft JSContact July 2022 [RFC7942] Sheffer, Y. and A. Farrel, "Improving Awareness of Running Code: The Implementation Status Section", BCP 205, RFC 7942, DOI 10.17487/RFC7942, July 2016, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", STD 90, RFC 8259, DOI 10.17487/RFC8259, December 2017, . [RFC8984] Jenkins, N. and R. Stepanek, "JSCalendar: A JSON Representation of Calendar Data", RFC 8984, DOI 10.17487/RFC8984, July 2021, . 7.2. Informative References [RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, DOI 10.17487/RFC3261, June 2002, . [RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet: Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002, . [RFC3966] Schulzrinne, H., "The tel URI for Telephone Numbers", RFC 3966, DOI 10.17487/RFC3966, December 2004, . [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005, . [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006, . [RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322, DOI 10.17487/RFC5322, October 2008, . Stepanek & Loffredo Expires 12 January 2023 [Page 26] Internet-Draft JSContact July 2022 [RFC6473] Saint-Andre, P., "vCard KIND:application", RFC 6473, DOI 10.17487/RFC6473, December 2011, . [RFC6474] Li, K. and B. Leiba, "vCard Format Extensions: Place of Birth, Place and Date of Death", RFC 6474, DOI 10.17487/RFC6474, December 2011, . [RFC6715] Cauchie, D., Leiba, B., and K. Li, "vCard Format Extensions: Representing vCard Extensions Defined by the Open Mobile Alliance (OMA) Converged Address Book (CAB) Group", RFC 6715, DOI 10.17487/RFC6715, August 2012, . [RFC6869] Salgueiro, G., Clarke, J., and P. Saint-Andre, "vCard KIND:device", RFC 6869, DOI 10.17487/RFC6869, February 2013, . [RFC8605] Hollenbeck, S. and R. Carney, "vCard Format Extensions: ICANN Extensions for the Registration Data Access Protocol (RDAP)", RFC 8605, DOI 10.17487/RFC8605, May 2019, . Authors' Addresses Robert Stepanek FastMail PO Box 234, Collins St West Melbourne VIC 8007 Australia Email: rsto@fastmailteam.com Mario Loffredo IIT-CNR Via Moruzzi,1 56124 Pisa Italy Email: mario.loffredo@iit.cnr.it Stepanek & Loffredo Expires 12 January 2023 [Page 27]