#####################################################################
#  Application for Registration of gateway site within .fidonet.org #
#####################################################################
#  [Revision-Date: 02/07/96]
#
#  (If you have a World-Wide-Web browser, *please* use the form at
#       http://www.fidonet.org/fidonet/gateappl.htm
#  as a *preferred* alternative.  That form will generate confirmation
#  to your MX-receiver to speed up the process.)
#
#####################################################################
#
#          Instructions: (Please read *CARFULLY*)
#          ======================================
#
#  Use the following template to create a message to
#              mapmaster@fidonet.fidonet.org
#
#  Your message *MUST* be sent via the Internet through YOUR OWN gateway.
#  Do *NOT* send it via FidoNet mail thru my gateway nor via
#  FidoNet mail to my Home system!  It will be *IGNORED* if you do so!
#  Just as it is a *requirement* for obtaining a Node number in FidoNet
#  to send your request generated from your own system, so it is with
#  requesting gateway status.  I *must* be able to acertain that your
#  system and the routing via your smart-host is operating correctly.
#  The headers of your message, when it arrives,  contains many clues
#  as to whether your link will be able to perform the function of
#  being the MX-receiver for your system (many are willing, but are
#  unable to handle it technically).
#
#  The information given will be used for the Domain-Name-Server,
#  UUCP Map for your site, and various other lists used in maintaining
#  the domain.
#
#  I also *MUST* receive confirmation via E-Mail to
#  'gatemaster@fidonet.fidonet.org' from the Postmaster of your
#  MX-receiver confirming that they are willing to be the MX-receiver
#  for your system and the Nets which you desire routed to you.
#  I will NOT enter any MX-records into the Domain-Name-Server which
#  the MX-receivers are not ready for!
#
#####################################################################
#
#  Example:
#
#  Your Name............................: Burt Juda
#  Your E-Mail Address..................: burt@nisc.ieee.org
#       (where I can correspond with you NOW)
#  FQDN of Gateway Site.................: mcastl.fidonet.org
#       (if you want a third-level hostname & domain within the
#       .fidonet.org domain, this should be of the format of
#       hostname.fidonet.org)
#  SysOp Name...........................: Burt Juda
#  FidoNet Address of Gateway...........: 1:13/10
#  Region...............................: 13
#  Operating System.....................: MS-DOS
#  Gateway Software.....................: GIGO
#       (these help for debugging sometimes)
# 
#  FidoNet Address of SysOp.............: 1:107/309
#       (if different from the gateway's address, where I can get
#       emergency mail to you via FidoNet NetMail)
#  Postal Address.......................: P.O. Box XXX
#  City.................................: Somewhere
#  State................................: NJ
#  Zip..................................: 12345
#  Voice Phone Number...................: 1-xxx-yyy-zzzz
#       (the above will be kept strictly *confidential*)
# 
#       (if you are running your own 24-hour/7-day SMTP daemon to
#       receive the mail, set this to your own hostname, which *must*
#       have a static IP-address)
#  FQDN of Primary MX-receiver..........: fidonet.fidonet.org
#  IP Address of Primary MX-receiver....: 199.172.136.31
#  Name of Contact at MX-receiver.......: Burt Juda
#  E-mail address of Contact............: postmaster@fidonet.fidonet.org
# 
#       (use this only if you want a 'backup' MX-receiver)
#  FQDN Secondary MX-receiver...........: n/a
#  IP Address of Secondary MX-receiver..: n/a
#  Name of Contact at MX-receiver.......: n/a
#  E-mail address of Contact............: n/a
# 
#  Comments:
#  gateway for Net 107
# 
#       (use the 'Comments' area to list Nets which you wish to gate the
#       INbound traffic for.  Note that the MX-records for the Nets will
#       NOT be set until I receive confirmation from the MX-receiver that
#       they are ready to handle the traffic (unless you are running
#       your own SMTP daemon, in which case I will *assume* that you
#       are ready for it).
#
#
##########################################################################
#---- REMOVE ALL TEXT ABOVE (and including) THIS LINE BEFORE SENDING ----#

Your Name............................: 
Your E-Mail Address..................: 
FQDN of Proposed Site................: 
SysOp Name...........................: 
FidoNet Address of Gateway...........: 
Zone.................................: 
Region...............................: 
Net..................................: 
Node.................................: 
Operating System.....................: 
Gateway Software.....................: 

FidoNet Address of SysOp.............: 
Postal Address.......................: 
City.................................: 
State................................: 
Zip..................................: 
Voice Phone Number...................: 

FQDN of Primary MX-receiver..........: 
IP Address of Primary MX-receiver....: 
Name of Contact at MX-receiver.......: 
E-mail address of Contact............: 

FQDN Secondary MX-receiver...........: 
IP Address of Secondary MX-receiver..: 
Name of Contact at MX-receiver.......: 
E-mail address of Contact............: 

Comments:


############################## EOF #################################